Electric tap for blind holes

Odoo • Image and Text

    The GSMPRO M18 tapper makes it convenient and easy to tap a series of holes quickly.
    The special gear box design gives the operator precise control:

    • With no pressure on the spindle, it does not spin
    • Push down on the spindle for clockwise rotation at lower speed (280 rpm)
    • Pull up on the spindle for anticlockwise rotation at higher speed (680 rpm)

    Its specially designed motor is wound for high torque and low rpm, giving it controllable power and making it the ideal tool for tapping applications.It includes a high concentricity universal 2-jaw tap chuck with a sprung swivel joint to minimize tap breakage.

    This allows to grip any tap of any standard from M6 up to M18. The ergonomic handle helps the operator to hold the tap straight. Includes a high-leverage side handle and a depth stop for blind hole tapping.

    Delivery in case with savety clutch, side handle, depth stop and maintenance tool!


    Power input 450 W
    Voltage 230V/50Hz
    No load speed right: 280 min -1
    left: 680 min -1
    Tapping range M6-M18
    Max. tapping capacity in aluminum and steel: 18 mm
    Insulation class
     1, single conductor
    Overload protection integrated
    Net weigth
    3,15 kg
    400 x 80 x 200 mm
    Cable length
    3 m