HSS-Co Fully ground core drills - Short - made in Germany

Using core drills from JEPSON makes drilling more economical and faster!

Mit Kernbohrern von JEPSON
wirtschaftlicher und schneller bohren !

Using core drills from JEPSON makes drilling
more economical and faster !

HSS-Co Fully ground core drills - Short (30 mm) - 8% Cobalt
HSS-Co core drills short (30 mm) - 8% Cobalt

Description:

  • Ø 12 - 100 mm
  • Cutting depth: 30 mm
  • Weldon shank 19 mm
    for core drills up to Ø 60 mm
  • Weldon shank 32 mm
    for core drills from
    Ø 61 mm

More economical

Faster

Lower noise

More precision

Lower energy effort

Lower chipping area

Pre-drilling unnecessary

No burr formation

Increased tool life

Full-grinding technology

Improved chip flow

Resharpenable

Core drills: the cutting surface is reduced to a minimum
Core drills...
Solid drills cut the entire area
Solid drills...
Cost comparison
Cost comparison
Core drills assortment
Core drills assortment

Range of core drills - short: 30mm

Ref. Ø[mm] Ref. Ø[mm]
490200 Pilot 075* 490233 33S
490201 Pilot 090* 490234 34S
490212 12S 490235 35S
490213 13S 490236 36S
490214 14S 490237 37S
490215 15S 490238 38S
490216 16S 490239 39S
490217 17S 490240 40S
490218 18S 490241 41S
490219 19S 490242 42S
490220 20S 490243 43S
490221 21S 490244 44S
490222 22S 490245 45S
490223 23S 490246 46S
490224 24S 490247 47S
490225 25S 490248 48S
490226 26S 490249 49S
490227 27S 490250 50S
490228 28S 490251 51S
490229 29S 490252 52S
490230 30S 490253 53S
490231 31S 490254 54S
490232 32S 490255 55S

Range of core drills - short: 30mm

Ref. Ø[mm] Ref. Ø[mm]
490256 56S 490279 79S
490257 57S 490280 80S
490258 58S 490281 81S
490259 59S 490282 82S
490260 60S 490283 83S
490261 61S 490284 84S
490262 62S 490285 85S
490263 63S 490286 86S
490264 64S 490287 87S
490265 65S 490288 88S
490266 66S 490289 89S
490267 67S 490290 90S
490268 68S 490291 91S
490269 69S 490292 92S
490270 70S 490293 93S
490271 71S 490294 94S
490272 72S 490295 95S
490273 73S 490296 96S
490274 74S 490297 97S
490275 75S 490298 98S
490276 76S 490299 99S
490277 77S 4902100 100S
490278 78S    

* Pilot/ejector 075 for core drills Ø 12 - 60 mm (Weldon 19)
* Pilot/ejector 090
for core drills Ø 61 - 100 mm (Weldon 32)


HSS-Co Fully ground core drills - Long - made in Germany

Using core drills from JEPSON makes drilling more economical and faster!

HSS-Co Fully ground core drills - long (50 mm) - 8% Cobalt
HSS-Co core drills long (50 mm) - 8% Cobalt

Description:

  • Ø 12 - 100 mm
  • Cutting depth: 50 mm
  • Weldon shank 19 mm
    for core drills up to Ø 60 mm
  • Weldon shank 32 mm
    for core drills from Ø 61 mm

More economical

Faster

Lower noise

More precision

Lower energy effort

Lower chipping area

Pre-drilling unnecessary

No burr formation

Increased tool life

Full-grinding technology

Improved chip flow

Resharpenable

A:) When placing the core drill, the coolant is started by the ejector. B:) Through the rotation of the core drill, the coolant is transferred to the desired locations. C:) At the end of the drilling phase the biased pin pushes the core out and the coolant supply is automatically stopped.
scheme...
The use of core drills starts at Ø 12 mm !
Core drilling is economical
HSS-Co High performance toothing
HSS-Co High performance toothing

Range of core drills - long: 50mm

Ref. Ø[mm] Ref. Ø[mm]
490500 Pilot 100* 490533 33L
490501 Pilot 120* 490534 34L
490512 12L 490535 35L
490513 13L 490536 36L
490514 14L 490537 37L
490515 15L 490538 38L
490516 16L 490539 39L
490517 17L 490540 40L
490518 18L 490541 41L
490519 19L 490542 42L
490520 20L 490543 43L
490521 21L 490544 44L
490522 22L 490545 45L
490523 23L 490546 46L
490524 24L 490547 47L
490525 25L 490548 48L
490526 26L 490549 49L
490527 27L 490550 50L
490528 28L 490551 51L
490529 29L 490552 52L
490530 30L 490553 53L
490531 31L 490554 54L
490532 32L 490555 55L

Range of core drills - long: 50mm

Ref. Ø[mm] Ref. Ø[mm]
490556 56L 490579 79L
490557 57L 490580 80L
490558 58L 490581 81L
490559 59L 490582 82L
490560 60L 490583 83L
490561 61L 490584 84L
490562 62L 490585 85L
490563 63L 490586 86L
490564 64L 490587 87L
490565 65L 490588 88L
490566 66L 490589 89L
490567 67L 490590 90L
490568 68L 490591 91L
490569 69L 490592 92L
490570 70L 490593 93L
490571 71L 490594 94L
490572 72L 490595 95L
490573 73L 490596 96L
490574 74L 490597 97L
490575 75L 490598 98L
490576 76L 490599 99L
490577 77L 4905100 100L
490578 78L    

* Pilot/ejector 100 for core drills Ø 12 - 60 mm (Weldon 19)
*
Pilot/ejector 120 for core drills Ø 61 - 100 mm (Weldon 32)

MAGPRO Magnetic drills - Precision and reliability at an economical price

JEPSON Power ® The inventor of the dry cutter technology - Advanced technology from more than 30 years of experience

Performance - Reliability - Cost effectiveness